Room amplifier M219
In a Revox Multiroom system, you always need a central unit (a Re:system M10, Re:system M51 or Re:system M100) and an amplifier for each side room. Depending on the room requirements, this can be a Re:connect M219 side room amplifier or Re:system product in a "slave" version.
The Re:connect M219 side room amplifier is connected to the multiroom module in a Re:system device using a CAT 7 standard Revox multiroom cable. Depending on the configuration, up to 32 side rooms can be connected to a Revox Multiroom system.
At least two speakers are connected to an M219 to provide sound for a room. We also recommend connecting a Re:control M217/M218 wall-mounted control panel.
Optionally, up to 3 local sources can also be connected to a M219 side room amplifier. This could, for example, be a television in the bathroom, an iPod in a young person's room or the sound card from a PC in the home office. As the name says, these sources can only be listened to locally.
The RJ45 connection represents the connection to the Revox multiroom world. The audio and control data are transferred to the rooms over a Revox multiroom cable, e..g. CAT 7. The transmission is done at studio technology level with a symmetrical audio signal. This means that you can experience the best sound quality in all rooms.
Access to the Revox M-Link bus is made through the RJ11 connection. Typically, the Re:control M217 wall-mounted display is connected here. Optionally, the Re:connect M203 can be connected for controlling a television.
The speakers are connected using the best installation technology, through a Phoenix plug. In the same way, an additional Re:control M218 wall-mounted control panel or an external Re:connect M204 IR receiver can be connected to the 3-pin socket.
The M219 side room amplifier has 3 local inputs. Up to three analogue audio sources can be connected to these for purely local operation.
The M219 also has a pre-amp output. The performance level of the M219 is not enough if sound has to be provided for larger rooms or public areas like restaurants. External outputs of any size can be connected through the pre-amp output. The pre-amp output volume can be configured to a fixed or a variable level.
The Re:connect M219 side room amplifier can be used for decentralised as well as centralised applications. Normally, side room amplifiers are installed in a central equipment cabinet complete with cabling and then connected with other components such as wall-mounted operating panels, speakers or even external sources.
It is important that a lot of care and attention is paid with such an installation. Both the configuration of the system and the cabling must always be done such that the cabling layout can always be traced back.
If a centralised installation is not possible because of cabling issues in the building, the side room amplifiers can also be installed decentrally, i.e. in the different rooms of the house.
Intelligent TV connection
With the Re:connect M203 TV interface, Revox offers the possibility of controlling certain televisions in any room where a Re:system product or a Re:connect M219 side room amplifier is deployed.
With the M203, the Revox system controls the behaviour of the television in conjunction with the selected audio source. Depending on the source, the M203 interface doesn't just turn the connected television on or off through an RS232 control; it also switches to the appropriate video input.
You don't need to have countless remote controls or to carry out countless operations any more. You simply press one button on your remote control and straight away, the Revox world starts the selected source and if necessary, the Revox system switches on the television with the corresponding input.
Often, it is necessary to install the Re:connect M219 in a plant room or cabinet. With the Re:cessory M219 spacers, it is possible to bolt several M219s together with sufficient space between them to allow for adequate ventilation of the products.
|Abmessungen||H 60 x B 225 x T 160 mm|
|Netzspannung||230 V, 115 V|
|Netzsicherung||0,5 A träge, 1 A träge|
|Leistungsaufnahme||Max. 115 Watt|
|Leistungsbetrieb||7 Watt (Zimmerlautst. ohne Zusatzg.)|
|Betriebsbedingungen||+10 bis +40 °C (Feuchteklasse nach DIN 40040)|
|Musikleistung*||2 x 50 Watt an 4 Ohm|
|Frequenzgang*||10 Hz - 25 kHz / -3 dB|
|Dämungsfaktor*||>200 bei 8 Ohm / 1 kHz|
|Harmonische Verzerrungen*||0,03 % bei 10 Watt|