nav-ico

The shapely sound column.
Revox Scala 120
In white, black or silver.

Scala 120 silver/black
Scala 120 silver/black
Scala 120 all in white
Scala 120 all in white

The Scala 120 sound sculpture

The Scala 120 is a best-in-class product, combining a sensational design with a pinnacle of listening pleasure.

With the Scala 120 Revox is presenting a completely newly created speaker design. The goal was to develop a never previously seen design, which could be integrated both into ultra-modern and into classically styled living rooms. Identifying the right design has taken several years.

In terms of colours, Revox has gone for a classic black or elegant silver/anthracite housing with a black grille. The colour selection makes a clear statement and underlines the wonderful shape of the speaker. If you are looking for something more understated, the Scala 120 is also available in a completely white outfit. The speaker is characterised principally by its uncomplicated design. 

A passion for detail is also revealed in the high quality glass foot, in black or white, to match the colour of the speaker. The corners have been given a radius that blends in with the overall appearance. As a result, the actual speaker appears as if it is floating.

Scala 120 front grill
Scala 120 front grill
Detail Scala 120 in black
Detail Scala 120 in black
Scala 120 with Joy S120 and Joy CD player
Scala 120 with Joy S120 and Joy CD player

Technology

The Scala 120 is a 2.5-way bass reflex speaker system with a transmission range from 40 Hz to 30 kHz. With a nominal impedance of 4 ohm, the Scala generates a mean sound pressure of 88 dB. The rated load capacity is 120 W and if required, can have pulse peaks of up to 150 W. Revox recommends the use of an amplifier with performance levels of between 60 and 150 W. In particular, we recommend the Revox Joy S119 network receiver with 2 x 60 W output performance.

Four 90 mm aluminium chassis are deployed in the Scala for the low to mid-range tones. While two of these chassis are planned to be used exclusively for the bass range, the other two chassis operate across the complete scale of bass and mid-range tones. The result is that the Scala not only reproduces the mid-range tones cleanly, it can also play the bass notes powerfully and accurately. The four chassis are complemented by a 30 mm fabric calotte tweeter that reproduces the high frequencies in a very precise way.

You really should experience the complete sound picture of the Scala by visiting your nearest specialist dealer. With its wonderful warmth, the Scala 120 is a joy to listen to even over longer periods and at lower volume levels. This excellent low volume behaviour characteristic of Revox speakers is down to the development of the chassis. Here, great value is placed on the use of minimal movement resistance in the chassis, which greatly influences the behaviour at low volume levels.

The production of a unique housing

The technical product development also presented the Revox engineers with quite a number of challenges. New forming processes had to be developed for the production of the highly complex wooden housing. Special gluing and moulding techniques were necessary for the gluing of the 5D, milled wooden shapes. The housing side panels are made up of 7 layers of wood glued together. Through its shape, the multi-braced housing prevents the creation of additional waves.

Milling the rear panel
Milling the rear panel
5D milling head in the diagonals
5D milling head in the diagonals
Milling in the multi-layer side panel
Milling in the multi-layer side panel
Levelling the lower edge of the standing surfaces
Levelling the lower edge of the standing surfaces
Further machining of the side panel
Further machining of the side panel
Milling the top of the housing
Milling the top of the housing
Preparing for gluing
Preparing for gluing
Putting the braces in place
Putting the braces in place
Gluing to the front and rear panels
Gluing to the front and rear panels
Gluing in a precision forming mould
Gluing in a precision forming mould
Housing after hardening is complete
Housing after hardening is complete
Milling out the baffle
Milling out the baffle
Milling into the speaker cut-outs
Milling into the speaker cut-outs
Filling in the final unevenness
Filling in the final unevenness
Sanding off the speaker
Sanding off the speaker
The last step before applying the lacquer
The last step before applying the lacquer

Downloads

17.05.17 Download

Revox brochure système multi-utilisateur

Revox brochure système multi-utilisateur (2MB)

17.05.17 Download

Revox brochure systèmes audio Joy

Revox brochure systèmes audio Joy (1MB)

17.05.17 Download

Revox brochure haut-parleurs

Revox brochure haut-parleurs (2MB)

Slideshow - Scala 120

Scala 120 silver/black
Scala 120 silver/black
Scala 120 white
Scala 120 white
Scala 120 details
Scala 120 details
Scala 120 perspective view
Scala 120 perspective view
go to top