Compact and convincing.
You don't have a lot of space available but you don't want to compromise on excellent audio quality? Revox has developed the Joy Symphony to handle just such situations. The Swiss audio specialists have integrated two powerful speakers with an impressively pure sound picture into a housing that is just 14 x 50 x 30 cm. The high quality audio device is produced in the Black Forest. Alongside more than 20,000 Internet radio stations and countless podcasts, music can be streamed from all UPnP storage media in the home network or played directly from USB sticks, Smartphones and iPod & Co. You can even connect your television through two digital inputs.
The Joy Symphony impresses through its minimalised shape and design language. It is available in dark silver-grey with a black speaker grille or completely in white. The housing is made of high-quality MDF, combined with an elegant aluminium operating panel between the speakers. Here, you can adjust the volume or access the "MyMusic" folder directly. Individual favourites from albums, playlists and Internet radio, for example, are collected together in "MyMusic".
As well as through its classic design, in silver-grey with black speaker grilles or completely in white, the Symphony also stands out through its high-quality,
multi-braced wooden housing and its true aluminium operating panel. The unit, which may appear to have a somewhat understated effect as a result of the reduced language of its shape, reveals its full potential, once it is switched on.
Two coaxial speakers with a diameter of 108 mm, driven by a 2 x 25 watt sinus amplifier, breathe life into the sound miracle and provide the basis for a space-filling audio experience. As you would expect from Revox, the Joy Symphony, created in Germany and Switzerland, ticks all the boxes both in terms of design and sound.
The Joy remote control can simultaneously be used as system remote control for TV, DVD player and other consumer electronics devices. In connection with the Revox IR KNX converter it is also possible to switch the light or select a scene from the building technology.
By means of the EasyCreator Software, which was developed for the S208, operating sequences (so-called macros) can easily be programmed and then recalled by the remote control.
The Joy Symphony can be controlled completely either through the special Revox remote control or using the Revox iOS and Android Apps. In addition, using buttons on the housing, the volume can be controlled directly and the My Music folder can also be accessed. The folder stores up to 18 entries in the form of radio stations, tracks, albums, artists and complete playlists. Even the alarm clock function can directly access your favourites.
For all Joy devices Revox offers the so-called Playqueue. Store the titles that you want to listen to into this Playqueue while browsing, without starting these titles immediately.
The Playqueue can be compared to a Jukebox function, allowing the creation of a long list of your favourite titles. You can store these lists on your Smartphone/Tablet and play them back at other times or even with other Joy products in your network.
As smart as your phone: the Apple App
The completely wireless, bi-directional remote control for all the important functions combines the attractive, touch-based Apple user interface with Revox's well-known intuitive operating philosophy. Choose between the individual sources using simple operational sequences. Additionally, you will see a lot of additional information about the Internet radio station that is currently playing and other sources. You can also set up many other functions such as two separate timers, sound settings and individual names for devices and rooms very simply, using the remote control.
In addition to a 230 V mains power connection, the Joy Symphony, which weighs in at just 7.5 kg, also has a 12 V connection making it the ideal companion when travelling in your caravan or camper, for example.
Furthermore, an optical and a coaxial audio input with 16, 20, 24 bit PCM are available as well as a USB connection for music from a USB flash or hard drive.
In these increasingly hectic times, moments of relaxation and enjoyment are all too few and far between. Decide for yourself when and where the moment is right for you to switch the Joy Symphony on and off. With its timeless, classic design, it integrates itself perfectly even in small spaces but it still remains an eye-catcher. You define the source, whether it is the Internet, a USB stick, a Smartphone, a tablet or a television. The Joy Symphony defines the sound.
With the optional Revox Joy DAB+ / FM module Revox provides in addition to Internet radio also the classical radio broadcast possibilities DAB+ and FM.
In the Radio source you will then find up to 3 radios (Internet, DAB, FM). Every radio can be configured individually with their own channel list. All radio stations can also be stored in the MyMusic directory.
H 141 mm x W 500 mm x D 335 mm*
*with WLAN antenna. Please add 30-40 mm for
|RMS performance||2 x 25 Watt Sinus|
|Frequency range (IEC)||42 Hz - 22 kHz|
|Harmonic distortion||0.05 % at 1 Watt / 4 Ohm|
|Audio inputs||1 optical digital and 1 coaxial digital |
with 16, 20, 24 bit PCM
|Remote control operating distance||65 m without obstructions|
|Audio formats||ALAC, AAC, AIFF, FLAC, MP3 (cbr + vbr), |
OGG-Vorbis, WAV, WMA
|Playlist formats||ASX, M3U, PLS|
|Supported media servers||UPnP AV 1.1 & DLNA compatible servers|
|Gapless audio||ALAC, MP3 and AAC (require Gapless Tags)|
FAQ - Häufig gestellte Fragen
Can I listen to music synchronously in different room with several Joy products?
The Joy was not developed for a multiroom solution with synchronous music over a network. For this purpose you can find excellent solutions in the range of the Revox M-series.
However, there is an approach within the Joy range to listen to music synchronously from two or more rooms. Use the digital output of your output device and connect this output with a digital input of a further Joy device. If required, you can arrange this loop-through as well with several Joy devices. Please note for this purpose that only the S119 and the S120 provide a digital output. The last device in such a cabling can also be a S118 or a Joy Symphony.
How can I operate a headset with the Joy network receiver?
You can connect a headset by using a "chinch to phono" adapter to the pre-out of the Joy network receiver.
If you want to operate speakers with the Joy permanently, it is possible to operate the headset at the same time, however, the speakers will run as well. In a future software version the Mute button will effect that the speaker outputs are muted, but the Pre Out is still activated.
Which audio formats can be played back by the Revox Joy network receiver?
The Revox Joy can play back most of the established audio formats. A current list with formats can always be found in the latest user manual on this website or under Technical Data. The most important formats like WAV, AIFF, FLAC, AAC, MP3, WMA and OGG Vorbis are supported in either case.
I already possess speakers of another brand and would like to connect them to the Joy. However, the Joy network receiver offers only the Revox speaker range for selection. Will my speakers sound good with the Joy amplifier?
All Joy network receivers, especially the S119 and S120, are amplifiers with an outstanding sound. The pulse-width-modulation functionality, which Revox has been implementing for years, allows an excellent sound quality - not only in connection with Revox speakers but as well with almost all reliable speakers in the market.
However, every passive speaker has, based on some key data such as housing dimensions and geometry, speaker chassis and calibration of the frequency separating filter, a certain deviation from the theoretically ideal frequency response. As we are perfectly aware of these deviations of the Revox speakers from development and fabrication, we are able to rectify these deviations by means of the digital signal processor (DSP), which is integrated in all Joy network receivers, and thus improve the sound characteristics even further.
This means for your audio chain as a final result that the sound quality can be set up ideally when using Revox speakers and a Revox Joy network receiver with integrated DSP, while a speaker of another brand sounds also good - with neutral DSP settings - with a Joy device.
If you are still in doubt, just ask your specialised dealer to demonstrate this function. You will be surprised how brilliant a Revox chain sounds.
Is it possible to integrate the Revox Joy into an intelligent building control?
In connection with the S208 remote control, Revox offers an IR/KNX converter, which is able to send up to 8 commands to a KNX system in order to control light or shutters or to activate a complete scene in the KNX building technology. If you require more integration into a building management system, you will find detailed information in the range of the Revox M-series, where Revox developed many solutions in cooperation with the company GIRA.
Though I can see the information on interpreter, album and title of my music files, the cover is not displayed. What are the possible reasons?
For this, a short excursion into the metadata basics is necessary. According to the internet database and the final audio format, the metadata and also the cover data are stored differently. While WAV files often conduct the metadata from the folder system and certain paths for the cover, MP3 and FLAC files offer the possibility to write these data as well into the file and are thus available even if single titles are taken to the car on a USB stick. This means that the correct display of cover and metadata is in the first instance owed to the internet data base or the personal data management.
On a UpnP/DLNA server the server assumes the evaluation of the metadata and places them at the Joy's disposal. Depending on the UPnP service, the data are edited better or worse. We experienced that most UPnP services work quite well. In the long run, a service with costs will generally offer more features, since the provider has the chance to refine and enhance his service.
As a second step, set up your UPnP server in a way that the data can be well-edited. Music files can also be stored on a simple storage medium that does not provide any services and therefore only offers a file structure. In this case we recommend to deposit the metadata within the file in order to display them properly. Due to the system's characteristics, covers on a USB stick can only be illustrated by means of the remote control, not with the Apps.
I would like to control my Joy with several Smartphones/Tablets. However, the App shows a message that another device is controlling my Joy. What do I have to consider?
Revox developed the Joy in a way that only one App is able to access the Revox Joy at once in order to finish the commands of a user reliably. Therefore, Revox installed a mechanism ensuring that only one App can take on the control. To avoid that this mechanism leads to a dead-end, the Joy checks permanently whether a connected App really tries to access and releases the access again after a while - generally after 20 seconds at most. This means that these messages are intended and conduce mainly to the stable control of the system.
How can I arrange a software update on a Joy network receiver?
A software update can be activated via the S208 remote control or one of the Revox Joy Apps. In the Update menu you can choose whether the software update shall be effected via internet or the local USB connection. If the Joy is connected to the internet via WLAN, we highly recommend to download the update from our website, to copy it onto a USB stick and install it locally and not to arrange it by means of the internet option, in particular, if the WLAN connection is not constantly stable.
The software update option can be found in the remote control under setting, basic settings and software.
I would like to use Air Play. However, this function is not integrated in the Joy. How can I still transfer data from my Apple device to the Joy?
Connect an Airport Express or a Apple TV to one of the numerous audio inputs of the Joy. Rename the corresponding Joy audio input to e.g. "Apple" or "Apple TV". After having selected the local input you can transfer the data to the Airport Express or Apple TV.
I use an audio streaming service and would like to playback this service on the Revox Joy. Which options do I have?
The high number of audio streaming services in the market makes it impossible to integrate all services into one hardware. For this reason, Revox decided not to integrate a special service constantly, but to give you, as our customers, freedom of choice, whether to use a audio streaming service having its strengths in the classic music or to prefer another service focusing rather on pop and rock music.
Common tools, which can be acquired for relatively little money, allow to transfer music of audio streaming services from a Smartphone or tablet. The most flexible tool is the Bluetooth interface, which works for almost all Smartphone and tablets of the more modern development. Connect a Bluetooth interface to one of the Joy audio inputs and link your device up with the Bluetooth audio adapter. If required, you can rename the input of the Joy to "Bluetooth" or to the name of your favourite service. In order to transfer the music, redirect the headset output in your Smartphone or tablet to the Bluetooth device.
But as well other products such as Airport Express or Apple TV offer good solutions in this matter. However, they are limited to certain products like iPod, iPhone or iPad.
Another advantage of this junction is the application of the user interface of the audio streaming service itself and not having to familiarise with another operating structure.
With the optional Revox Joy DAB+/FM module, Revox offers both Internet radio and classic DAB+ and FM radio programmes.
Perfectly matched to the Revox Joy: The secure location for your iPhone or iPod with the optional docking station.